5.2 Preventive Maintenance
5.2.1 Clean the Lotus
1. Make sure the Lotus is in the working position.
2.
Use a water jet to thoroughly clean the Lotus.
3. Move the Lotus to the headland position.
4. Carefully engage the PTO at the lowest possible engine speed for a
short time to remove any water from the rotors.
5.2.2 Grease the Pivot Points
• Requirements:
•
Grease pump
• Biodegradable grease (Total Biomultis SEP2 or equivalent)
1. Use the grease pump to grease the pivot points.
Figure 16. Grease the Pivot Points
Maintenance 5-3
T-H001.1103EN
To Next Page
Loading...
