LELY 770 P - Diagrams and Tables; Diagrams and Schematics; Bolt and Nut Torque Table

6. DIAGRAMS AND TABLES
6.1 Lely Lotus 770 P Diagrams and Schematics
1.Double-acting ram
2.Throttle (1-way)
3.Breather
4. Combined ram
4a Single-acting component
4b Double-acting component
Figure 22. Mechanically Controlled Hydraulic Schematic
6.2 Bolt and Nut Torque Table
The following table specifies the standard torque load for all quality 8.8 bolts
in combination with quality 8 nuts on the Lotus.
Always
use a calibrated torque wrench when you torque-tighten bolts and nuts.
M6 M8 M10 M12 M14 M16 M20 M24
Nm 10 25 50 85 135 215 410 710
kgm 1.0 2.5 5.0 8.5 13.5 21.5 41.0 71.0
Diagrams and Tables 6-1
T-H001.1103EN