• Make sure all safety decals are not damaged. Replace if necessary (page
2-3
).
5.1.8 Maintenance After Prolonged Storage
• Grease the PTO shafts (page 5-5).
•
Replace the gearbox grease (page 5-6).
• Grease the pivot points (page 5-3).
• Grease the drive line (page 5-4).
• Torque tighten the nuts of the transport wheels to 270 Nm (27 kgm).
• Examine the deflection of the rotors. Adjust the stop bolts if necessary (page
5-7).
• Make sure the tyres meet the correct pressure (page 6-2).
• Examine the Lotus for damage and defects. Repair or replace damaged
parts.
• Examine the hydraulic system for leaks and damaged parts. Repair or
replace damaged parts.
• Examine the gearbox for leaks.
• Make sure all bolts and nuts are torque-tight (page 6-1).
• Make sure all safety decals are not damaged. Replace if necessary (page
2-3).
5-2 Maintenance
T-H001.1103EN
To Next Page
Loading...
