1. INTRODUCTION
The Lely Lotus 770 P is a pull-type rotary tedder-to ted mown fodder crops or
to wide spread crop swaths.
The
working width of the Lely Lotus 770 P is 7.70 meter, and can be driven at
speeds up to 15 km/h. The wheels are positioned closely behind the tines to
follow ground contours accurately.
The Lely Lotus 770 P has 6 rotors. A rotor has 7 tine arms with a double spring
steel tine each. The special shaped tines pick up the crop and spread it with a
minimum loss. The rotors can pivot in relation to each other to follow field
indulations accurately.
The Lely Lotus 770 P is connected to the tractor hydraulics. The hydraulic
control makes sure the Lely Lotus 770 P moves quick and easily to the
transport position. The machine can be transported behind the tractor. The
transport width is 3 meter. The Lely Lotus 770 P has either a towing eye for an
upper tractor drawbar or a lower tractor drawbar.
Various optional extras are also available. Refer to Optional Extras Lely Lotus
770 P (page 1-2).
1. Drawbar - 2. Primary PTO shaft - 3. Front safety guard - 4. Wheel wedges - 5. Hydraulic
ram - 6. Locking hook - 7. Rear safety guard - 8. Transport wheels - 9. Tine - 10. Rotor - 11.
Rotor wheel - 12. Hydraulic ram - 13. Gearbox
Figure 1. Overview of the Lely Lotus 770 P
Introduction 1-1
T-H001.1103EN
To Next Page
Loading...
