Installing the components
Chapter 2 - page 2
2
D-H002.0607EN
2.1.1 Hoisting point
When hoisting the Discovery, it must be lifted by the appropriate point. This is located within the motor
compartment. The hoisting eye can be found by opening the black cover. The strip that the hoisting eye is
integrated into can be found in front of the battery. This is the lifting eye that can be used for moving the Discovery
safely.
2.1.2 Placement of the charger unit
NOTE
• The precise placement of the charger unit (figure 2 2) within the cowshed is extremely important. Find a
central (quiet) spot in the shed where the charger unit can be installed.
• Make the barn cleaner follow part of the wall first, before embarking on the actual route; this allows the
gyroscope settings to be compensated.
• The positioning of the charger unit is important. To allow the barn cleaner to park and depart correctly, there
must be 2.5m room in front of the charger unit and 1.5m room behind it.
Figure 2 2 Positioning of the charger unit
To Next Page
Loading...
