Chapter 4 - page 13
DISCOVERY manual
4
D-H002.0607EN
4.3.4 "Adjustments" menu
The "Adjustments" menu consists of the following submenus:
"Adjustments > Real-time clock" submenu
The correct date and time should be entered in this screen. The time settings for the barn cleaner as based on this
clock. The correct date setting is also important, for searching for alert reports on that date.
Clock 11:53
Date 2-9-2004 (dd/mm/yy)
To set the date and time, select the "Real-time clock" menu and then the "" button. The date and time can be
adjusted using the Soft2 button (↓) together with the UP/DOWN selection buttons (+ and -).
"Adjustments > Language" menu item
This screen allows you to change the language of the software screens.
"Adjustments > Gyroscope" menu item
This screen allows you to recalibrate the gyroscope. The Discovery must not be moved during the calibration, not
even slightly.
Figure 4 6 "Adjustments" flow diagram
To Next Page
Loading...
