21
The following information is also displayed:
LOGGING DURATION T = HR:MIN
SAMPLE INTERVAL ∆ = MIN:SEC
MIN MAX AVE
3.9.5. SEND TO PC
This allows the user to download internal data to a PC
running the WinLog program. The digital output lead must
be connected from the digital output socket, on the front of
the instrument, to the PC serial port. Within WinLog the
port must be active and Download Log selcted from the
instrument option within the WinLog program.
On selection of SEND TO PC the text will flash until all
data has been downloaded to the PC.
3.10 WINLOG
WinLog is the PC resident software for the LH series and
new Analyst Power Meters. The software is used to
continually log electrical power measurements or
download stored data from the Analyst to a Personal
Computer for further analysis
Fig. 7 WinLog Software
To Next Page
Loading...
