LEMKEN KARAT 10 - Check Marking; Checking Safety Sticker; Safety Equipment

WARNING
Risk of accident due to incorrect air pressure
Excessive air pressure in the tyres may cause them to
burst. Insucient air pressure can lead to overloading
of the tyres. This will have a negative inuence on accu‐
rate follow-on of the machine. This may result in acci‐
dents with injuries or death of persons or damage to the
machine.
– Do NOT use the assembly air pressure stated on the
tyres.
– Set air pressure according to the details in the tech‐
nical data. Ä Chapter 12 ‘Technical data’ on page 79
► Check air pressure. Correct according to the details in the technical
data. Ä Chapter 12.10 ‘Tyres and wheels’ on page 81
► Tighten the wheel nuts on the machine to the respective tight‐
ening torque.
9.2.4 Safety equipment
► Ensure proper functioning.
► Ensure proper functioning.
► Ensure legibility and integrity.
Checking air pressure
Checking wheel nuts
Checking the lighting equipment
Check marking
Checking safety sticker
Maintenance and repair work
en-GB | Item no. 17516276 | BA 01/2023-09 67