11 Shutdown and disposal
11.1 Final decommissioning
ENVIRONMENTAL PROTECTION
Do NOT leave machine parts exposed to weather condi‐
tions for an extended period, as operating materials, etc.
could be released into the environment.
Precondition:
√ Further use of the machine within the meaning of these instruc‐
tions is no longer intended.
1. Empty and clean all the hoppers, tubes and hoses.
Ä
Chapter 7 ‘Cleaning and care’ on page 60
ð
All machine parts are free from auxiliary materials, e.g. fertil‐
iser.
2. Remove all operating materials from the machine, e.g. grease.
Ä
Chapter 12.9 ‘Operating materials’ on page 81
3. Take the machine out of operation.
Ä
Chapter 8 ‘Decommissioning’ on page 61
4. Have the machine disassembled by qualied specialists.
WARNING: Risk of injury due to discharge of stored energy
Springs are under tension. Hydraulic components are pressurised.
5. Take machine parts and operating materials to a proper disposal
point.
Ä
Chapter 11.2 ‘Recycling and disposal ’ on page 78
Shutdown and disposal
en-GB | Item no. 17516276 | BA 01/2023-09 77
To Next Page
Loading...
