These operating instructions describe operation of the machine after
initial commissioning by the LEMKEN sales partner and handover to the
operator.
Prior to operation, initial commissioning and instruction in operation,
setting/adjustment and maintenance must have been carried out.
These instructions describe the machine in combination with a tractor.
If the requirements placed on the tractor are also met by other
machines or vehicles, the respective description can also be applied
in these cases.
Operation of the tractor, including its relevant functions, is not part of
these operating instructions. The operator and the user are responsible
for observing the operating instructions of the tractor.
For an unambiguous assignment of this document to the machine,
transfer the following data from the type plate of the machine:
Designation on the type plate Enter the machine data here:
Series
Type designation
Model year
Serial number
Year of manufacture
INFORMATION
Position of the type plate on the machine:
Ä
Chapter 3 ‘Design and description’ on page 16
Explanation of the full type plate content:
Ä
Appendix A ‘Type plate variants’ on page 88
The machines can be equipped dierently at the factory.
Standard components, special equipment or optional accessories are
not marked separately.
The contents of these operating instructions, e.g. illustrations, may
therefore dier from the equipment of the machine.
Depending on the equipment, additional documents may be required
for operation.
INFORMATION
Ä
Chapter 1.4 ‘Further applicable documents’ on page 5
Validity range
Equipment variants
About these instructions
en-GB | Item no. 17516276 | BA 01/2023-09 2
To Next Page
Loading...
