LEMKEN Opal 080 E - Page 40

Uncoupling the implement
38
 Depressurise the hydraulic hoses. See
operating instructions from the tractor -
manufacturer.
 Remove the top link from the headstock
(1).
 Disconnect the hydraulic hoses and the
electric cables.
 Install the protecting caps.
 Position the hydraulic hoses with the
couplings between the headstock (1)
and the adjusting nut (2).
 Attach the stand (3) with the connector
pin (4).
CAUTION
Risk of injury from falling stand
1
2
3
4
5