EasyManua.ls Logo

LENCO DVT-2201 - Password Setup

LENCO DVT-2201
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 43 -
DVD System Setup
Password Setup
Press the SETUP button to enter the setup menu, then use the ◄►direction buttons to select
Password Setup Page, the screen will display as shown below:
Password Mode
Password
On the menu, Use the ▲▼ direction buttons to
select the desired item. Press the OK button to
enter the item. Press the button to return.
1. Press the ▲▼ direction buttons to select
Password Mode.
2. Press the OK button to enter the setup, see the
left figure:
3. Press the ▲▼ direction buttons to select On or
Off.
4. Press the OK button again to confirm the setting
and return.
You can change the password by yourself.
1. Press the ▲▼ direction buttons to select
Password.
2. Press the OK
button to enter the setup, see the
figure on the left:
3. Press the OK button again to change the
password.
4. According to the indication in the menu, Use the
number buttons to enter the old password, then
enter the new password, then enter it again to
confirm. Press the OK button again to confirm
the setting and return. The password has been
changed successfully.
5. The Default Password is 3308.

Related product manuals