3
lencomarine.com
Basic Safe Operation
CONGRATULATIONS!
You have just purchased the finest trim tab system in the world! Welcome to the future.
Lenco trim tabs make the single most important dierence in the way your boat rides and
performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco
trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small
ski or a mega-yacht. Our ball screw design makes our tabs more reliable and twice as powerful
as typical hydraulic trim tabs. Coupled with any of our trim tab switches, they also perform with
instant response which makes them more precise and user-friendly.
Our goal is to manufacture products that simply make boating more enjoyable.
All Lenco Marine LLC Trim Tab products are CE certified
Basic Safe Operation:
While the boat is underway, do not move one tab up or down significantly as this may cause listing.
While at higher speeds, do not over trim. This causes the bow to lower quickly, resulting in a reduction of
speed and may cause the boat to veer.
When running in a following sea the tabs should be fully retracted. This allows for optimal performance.
While operating trim tabs, use caution. Improper use of trim tabs may cause accidents and/or injury.
Riding down the face of a steep wave
Negative eect
of following Seas
Risk of Broaching
or Burying the
Vessel’s Bow in
the wave trough
Vessel accelerates
down the waves face
Loss of
steering
Rapid water
flow down the
face of the wave
To Next Page
Loading...