Lenovo ThinkServer RS140 - Installing the Driver for an Ethernet Card

c.IntheAddPartitionwindow,select/boot(or/boot/efiinUEFImode)fromtheMountPoint
drop-downlistbox.
d.Selectext4(orEFISystemPartitioninUEFImode）fromtheFileSystemTypedrop-down
listbox.
e.IntheAllowableDriverswindow,selecttheharddiskdriveonwhichyouwanttoinstallthe
operatingsystem.
f.Typetheamountofspace(inMB)ofthenewpartitionandthenclickOK.
•Manuallycreateaswappartition
Tocreateaswappartition,dothefollowing:
a.ClickCreate.TheCreateStoragewindowisdisplayed.
b.SelectStandardPartitionandthenclickCreate.
c.IntheAddPartitionwindow,selectswapfromtheFileSystemTypedrop-downlistbox.
d.IntheAllowableDriverswindow,selecttheharddiskdriveonwhichyouwanttoinstallthe
operatingsystem.
e.Typetheamountofspace(inMB)ofthenewpartitionandthenclickOK.
14.IftheFormatWarningswindowisdisplayed,clickFormattoformattheharddiskdrive.
15.Inthe“Writingstorageconfigurationtodisk”window,clickWritechangestodisk.
16.Inthe“Bootloaderoperatingsystemlist”window,clickNext.
17.Thedefaultinstallationisabasicserverinstallation.Y oucancustomizeyourserverbyselectinga
differentsetofsoftwarefromthesoftwarelistoraddingadditionalrepositoriesthatyouwanttouse
forthesoftwareinstallation.SelectCustomizenoworCustomizelater.Then,clickNext.The
installationprocessbegins.
Notes:
•IfyouselectCustomizenow,youcanselectsoftwareinstallationpackagesofyourchoice.Then,
clickNext.
•WheninstallingtheoperatingsysteminUEFImode,donotselectthepackagenamed
tboot-1.7.4-1.el6.x86_64-PerfomrmsaverifiedlaunchusingIntelTXT.
•Ifawarningmessageisdisplayed,configurethesettingsasyouneed.Thefollowingstepsarebased
onthescenariothatContinueisselectedinthisstep.
18.Aftertheinstallationiscompleted,clickReboottorestartyourserver.
19.Theinstallationcontinuesaftertheserverrestarts.IntheWelcomewindow,clickForward.
20.ClickYes,IagreetotheLicenseAgreementandthenclickForward.
21.IntheSetUpSoftwareUpdateswindow,configurethesettingsasyouneed,andthenclickForward.
22.IntheFinishUpdatesSetupwindow,clickForward.
23.SetyourusernameandpasswordandthenclickForward.
24.SetyourtimeanddateandthenclickForward.
25.IntheKdumpwindow,configurethesettingsasyouneed.Thefollowingstepsarebasedonthe
scenariothatEnablekdumpisselectedinthisstep.ThenclickFinishtocompletetheinstallation.
Note:Whenpromptedtorestarttheserver,clickYes➙OK.
26.Followtheinstructionsonthescreentologintotheoperatingsystem.
InstallingthedriverforanEthernetcard
ToinstallthedriverforanEthernetcard,dothefollowing:
26ThinkServerRS140OperatingSystemInstallationGuide