Lenovo ThinkSystem SR550 - Internal Cable Routing

Callout Callout
17 Power supply 2 connector
18 Internal USB connector
19 Power supply 1 connector
20 SATA 4-7 connector
21 SATA 0-3 connector
22 M.2 module slot
23 Riser 2 slot
Notes:
•
1
Trusted Cryptography Module
•
2
Trusted Platform Module
Internal cable routing
Some of the components in the server have internal cables and cable connectors.
To connect cables, observe the following guidelines:
• Power off the server before you connect or disconnect any internal cables.
• See the documentation that comes with any external devices for additional cabling instructions. It might
be easier for you to route cables before you connect the devices to the server.
• Cable identifiers of some cables are printed on the cables that come with the server and optional devices.
Use these identifiers to connect the cables to the correct connectors.
• Ensure that the relevant cables pass through the cable clips.
Figure 14. Cable clips
28 ThinkSystem SR550 Setup Guide