Server model: sixteen 2.5-inch NVMe drives, eight SAS/SATA drives, two NVMe 810-4P switch
adapters, two NVMe 1610-4P switch adapters, one 8i RAID adapter
Figure 63. Cable routing for server models with sixteen 2.5-inch NVMe drives, eight SAS/SATA drives, two NVMe 810-4P
switch adapters, two NVMe 1610-4P switch adapters and one 8i RAID adapter
Cable
From To
1 Power cable for front backplane 1 Power connector on front backplane
1
Backplane power connector 1 on the
system board
2 NVMe signal cable for front
backplane 1
NVMe 0 and NVMe 1 connectors on
front backplane 1
NVMe 2–3 and NVMe 0–1 connectors
on the system board
3 NVMe signal cable for front
backplane 1
NVMe 2 and NVMe 3 connectors on
front backplane 1
C0, C1, C2, and C3 connectors on
the NVMe 1610-4P switch adapter
installed in PCIe slot 6
4 Power cable for front backplane 2 Power connector on front backplane
2
Backplane power connector 2 on the
system board
5 NVMe signal cable for front
backplane 2
NVMe 0 connector on front
backplane 2
C0 and C1 connector on the NVMe
810-4P switch adapter installed in
PCIe slot 4
6 NVMe signal cable for front
backplane 2
NVMe 1 connector on front
backplane 2
C0 and C1 connector on the NVMe
810-4P switch adapter installed in
RAID adapter slot on the system
board
7 NVMe signal cable for front
backplane 2
NVMe 2 and NVMe 3 connectors on
front backplane 2
C0, C1, C2, and C3 connectors on
the NVMe 1610-4P switch adapter
installed in PCIe slot 1
108 ThinkSystem SR650 Setup Guide
To Next Page
Loading...
