Figure 76. Removal of the large-size air baffle
Remove the system fan cage
The system fan cage might impede your access to some connectors. You must remove the system fan cage 
before you route cables.
“Read the  
installation  
Guidelines” on 
page 126
“Power off 
the server for 
this task” on 
page 194
“ATTENTION:  
Static Sensitive Device  
Ground package before opening” 
on page 127
To remove the system fan cage, complete the following steps:
Watch the procedure. A video of the removal process is available: 
•  Youtube: 
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
•  Youku: http://list.youku.com/albumlist/show/id_50483444
Chapter 3. Server hardware setup 133