Lenovo ThinkSystem SR650 Series - Install a hot-swap drive

Step 2. Slide the new hot-swap power supply into the bay until it snaps into position.
Figure 110. Hot-swap power supply installation
Install the air baffle
Use this information to install the air baffle.
“Read the
installation
Guidelines” on
page 126
“Power off the
server for this
task” on page
194
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
186
ThinkSystem SR650 Setup Guide