Cable From To
7 NVMe signal cable for front
backplane 2
NVMe 3 connector on front
backplane 2
C0 and C1 connectors on the NVMe
810-4P switch adapter installed in
RAID adapter slot on the system
board
8 Power cable for front backplane 3 Power connector on front backplane
3
Backplane power connector 3 on the
system board
9 NVMe signal cable for front
backplane 3
NVMe 0 and NVMe 1 connectors on
front backplane 3
C0, C1, C2, and C3 connectors on
the NVMe 1610-4P switch adapter
installed in PCIe slot 1
Server models with twenty-four 2.5-inch drives
Use this section to understand the cable routing for server models with twenty-four 2.5-inch drives.
Server model: twenty-four 2.5-inch SAS/SATA drives, one 8i RAID adapter, one 16i RAID adapter
Figure 44. Cable routing for server models with twenty-four 2.5-inch SAS/SATA drives, one 8i RAID adapter, and one 16i
RAID adapter
Cable
From To
1 SAS signal cable for front
backplane 1
SAS 0 and SAS 1 connectors on front
backplane 1
C0 and C1 connectors on the 8i RAID
adapter installed on the RAID adapter
slot
2 Power cable for front backplane 1 Power connector on front backplane
1
Backplane power connector 1 on the
system board
Chapter 2. Server components 73
To Next Page
Loading...
