Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku: http://list.youku.com/albumlist/show/id_50483444
Step 1. Use the key to unlock the security bezel to the open position.
Figure 72. Unlocking the security bezel
Step 2. Press the release latch 1 and pivot the security bezel outward to remove it from the chassis.
Figure 73. Security bezel removal
Attention: Before you ship the rack with the server installed, reinstall and lock the security bezel
into place.
Remove the top cover
Use this information to remove the top cover.
Chapter 3. Server hardware setup 129
To Next Page
Loading...
