Server models with sixteen 2.5-inch drives
Use this section to understand the cable routing for server models with sixteen 2.5-inch drives.
Server model: sixteen 2.5-inch SAS/SATA drives, one 16i RAID adapter
Figure 30. Cable routing for server models with sixteen 2.5-inch SAS/SATA drives and one 16i RAID adapter
Cable From To
1 Power cable for front backplane 1 Power connector on front backplane
1
Backplane power connector 1 on the
system board
2 SAS signal cable for front
backplane 1
SAS 0 and SAS 1 connectors on front
backplane 1
C0 and C1 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
Chapter 2. Server components 53
To Next Page
Loading...
