Cable From To
5 SAS signal cable for front
backplane 2
SAS 0 and SAS 1 connectors on front
backplane 2
C0 and C1 connectors on the 16i
RAID adapter installed in PCIe slot 4
6 Power cable for front backplane 2 Power connector on front backplane
2
Backplane power connector 2 on the
system board
7 SAS signal cable for the rear hot-
swap drive assembly
Signal connector on the rear hot-
swap drive assembly
C2 connector on the 16i RAID
adapter installed in PCIe slot 4
66 ThinkSystem SR650 Setup Guide
To Next Page
Loading...
