XCC network access label
The network access label for the XClarity Controller (XCC) is attached on the top side of the pull-out
information tab as shown. After you get the server, peel the network access label away and store it in a safe
place.
Note: The pull-out information tab is located on the right bottom of the front side of your server. For detailed
information, see “Front view” on page 17
Figure 2. Location of the XCC network access label
Quick response code
The system service label, which is on the top cover, provides a quick response (QR) code for mobile access
to service information. Scan the QR code with a mobile device and a QR code reader application to get quick
access to the Lenovo Service Web site for this server. The Lenovo Service Information Web site provides
additional information for parts installation and replacement videos, and error codes for server support.
The following illustration shows the QR code:
https://datacentersupport.lenovo.com/products/servers/
thinksystem/sr665/7d2w
Figure 3. QR code
2 ThinkSystem SR665 Setup Guide
To Next Page
Loading...
