Figure 92. Removing USB 3.0 connector vertically
To remove the PCIe riser card assembly, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
Step 1. Disconnect any cables connected to the adapters.
Step 2. Grasp the PCIe riser card assembly at the touch-points, and lift it out from the system board.
Figure 93. PCIe riser card assembly removal
Step 3. Remove the screws that fix the PCIe riser card, and slightly push it away to detach it from the riser-
cage.
98
ThinkSystem SR860 Maintenance Manual
To Next Page
Loading...
