a. Align the bottom of the PCIe riser card to the slot, and rotate the top to fit it into the slot on the
riser-cage; then, move the PCIe riser card slightly to fit the holes into the pins.
Figure 96. PCIe riser card assembly
b. Install the PCIe riser card to the riser cage with screws.
Figure 97. PCIe riser card assembly
Step 2. Align the PCIe riser card assembly with the connector on the system board; then, push it in until it
clicks in place.
100
ThinkSystem SR860 Maintenance Manual
To Next Page
Loading...
