Figure 62. Removing the front panel board assembly
Step 4. Disconnect cables from the front panel board assembly.
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front panel board assembly
Follow instructions in this section to install the front panel board assembly.
About this task
To avoid potential danger, read and follow the following safety statements.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
128
ThinkSystem ST250 V2 Maintenance Manual
To Next Page
Loading...
