Contents
Safety .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . v
Safety inspection checklist .  .  .  .  .  .  .  .  .  .  . vi
Chapter 1.  Introduction .  .  .  .  .  .  .  .  . 1
Server form factor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3
Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3
Particulate contamination .  .  .  .  .  .  .  .  .  .  8
Firmware updates .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  9
Tech Tips .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  13
Security advisories .  .  .  .  .  .  .  .  .  .  .  .  .  13
Power on the server .  .  .  .  .  .  .  .  .  .  .  .  .  13
Power off the server .  .  .  .  .  .  .  .  .  .  .  .  .  13
Chapter 2.  Server components .  .  .  .  15
Front view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
Side view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  21
Rear view .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
Rear view LEDs .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  24
System-board components .  .  .  .  .  .  .  .  .  .  27
System-board LED .  .  .  .  .  .  .  .  .  .  .  .  .  28
System-board jumpers and buttons .  .  .  .  .  .  .  28
Drive backplates/backplanes .  .  .  .  .  .  .  .  .  30
Power distribution board .  .  .  .  .  .  .  .  .  .  .  32
RAID adapters .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  34
Server locks .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  35
Internal cable routing.  .  .  .  .  .  .  .  .  .  .  .  .  37
Fan power cable.  .  .  .  .  .  .  .  .  .  .  .  .  37
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
M.2 adapter, intrusion switch, and RAID flash 
power module .  .  .  .  .  .  .  .  .  .  .  .  .  40
Optical/tape drives.  .  .  .  .  .  .  .  .  .  .  .  40
Fixed power supply .  .  .  .  .  .  .  .  .  .  .  41
Redundant power supplies .  .  .  .  .  .  .  .  43
Simple-swap drives .  .  .  .  .  .  .  .  .  .  .  44
Hot-swap drives.  .  .  .  .  .  .  .  .  .  .  .  .  48
Parts list.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  58
Power cords .  .  .  .  .  .  .  .  .  .  .  .  .  .  62
Chapter 3.  Internal cable routing .  .  .  63
Fan power cable .  .  .  .  .  .  .  .  .  .  .  .  .  .  63
Front panel .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  64
M.2 adapter, intrusion switch, and RAID flash 
power module .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  66
Optical/tape drives .  .  .  .  .  .  .  .  .  .  .  .  .  66
Fixed power supply .  .  .  .  .  .  .  .  .  .  .  .  .  67
Redundant power supplies .  .  .  .  .  .  .  .  .  .  69
Simple-swap drives .  .  .  .  .  .  .  .  .  .  .  .  .  70
Four 3.5-inch simple-swap drives .  .  .  .  .  .  70
Eight 3.5-inch simple-swap drives .  .  .  .  .  .  71
Six 3.5-inch simple-swap drives with ODD/ 
tape drives .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  72
Hot-swap drives .  .  .  .  .  .  .  .  .  .  .  .  .  .  74
Four 3.5-inch hot-swap drives .  .  .  .  .  .  .  74
Eight 3.5-inch hot-swap drives .  .  .  .  .  .  .  77
Eight 2.5-inch hot-swap drives .  .  .  .  .  .  .  78
Sixteen 2.5-inch hot-swap drives .  .  .  .  .  .  80
Four 3.5-inch and eight 2.5-inch hot-swap  
drives .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  82
Chapter 4.  Hardware replacement  
procedures .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  85
Installation guidelines .  .  .  .  .  .  .  .  .  .  .  .  85
Safety inspection checklist.  .  .  .  .  .  .  .  .  86
System reliability guidelines .  .  .  .  .  .  .  .  87
Working inside the server with the power on .  .  87
Handling static-sensitive devices .  .  .  .  .  .  88
3.5-inch/2.5-inch drive cage replacement.  .  .  .  .  88
Remove the 3.5-inch/2.5-inch drive cage .  .  .  88
Install the 3.5-inch/2.5-inch drive cage .  .  .  .  91
3.5-inch/2.5-inch hot-swap drive backplane  
replacement .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  92
Remove the 3.5-inch/2.5-inch hot-swap drive  
backplane .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  92
Install the 3.5-inch/2.5-inch hot-swap drive  
backplane .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  95
3.5-inch simple-swap drive backplate  
replacement .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  96
Remove the 3.5-inch simple-swap drive  
backplate .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  96
Install the 3.5-inch simple-swap drive  
backplate .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  98
CMOS battery (CR2032) replacement .  .  .  .  .  .  99
Remove the CMOS battery (CR2032)  .  .  .  .  99
Install the CMOS battery (CR2032) .  .  .  .  .  101
Drive replacement .  .  .  .  .  .  .  .  .  .  .  .  .  .  102
Remove a hot-swap drive .  .  .  .  .  .  .  .  .  102
Install a hot-swap drive .  .  .  .  .  .  .  .  .  .  104
Remove a simple-swap drive .  .  .  .  .  .  .  .  106
Install a simple-swap drive.  .  .  .  .  .  .  .  .  107
2.5-inch drive replacement from 3.5-inch drive 
bay .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  109
Fan replacement .  .  .  .  .  .  .  .  .  .  .  .  .  .  113
Remove the front system fan .  .  .  .  .  .  .  .  113
Install the front system fan .  .  .  .  .  .  .  .  .  115
© Copyright Lenovo 2022 i