After this task is completed
Complete the parts replacement. See “Complete the parts replacement” on page 217.
Server cover replacement
Follow instructions in this section to remove and install the server cover.
Remove the server cover
Follow instructions in this section to remove the server cover.
About this task
To avoid potential danger, read and follow the following safety statements.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
• S014
CAUTION:
Chapter 4. Hardware replacement procedures 199
To Next Page
Loading...
