From To
1
ODD/Tape drive power connectors
ODD/tape drive power connector on the system
board
2
ODD/Tape drive SATA connectors SATA 6, 7
Fixed power supply
Use the section to understand the cable routing for the fixed power supply.
Notes:
• Ensure that all cables are routed through the correct cable clips.
• As the processor power connectors on the power distribution board may look similar in appearance, make
sure that the
2 power supply processor power cable and 3 processor power cable are routed correctly as
illustrated.
Chapter 2. Server components 41
To Next Page
Loading...
