Table 21. Parts listing
Index
Description
Tier 1 CRU Tier 2 CRU FRU
Consumable
and
Structural
parts
For more information about ordering the parts shown in Figure 26 “Server components” on page 59:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/st250v2/7D8F/parts
1
Fixed power supply
√
2
Hot-swap power supply
√
3
Hot-swap power supply filler
√
4
Power distribution board for fixed
power supply
√
5
Power distribution board for hot-swap
power supplies
√
6
Power distribution board cover
√
7
Heat sink and fan
√
8
Processor
√
9
System board
√
10
Front system fan
√
11
5.25-inch LTO/RDX tape drive
√
12
5.25-inch optical disk drive
√
13
Front panel board assembly
√
14
Drive cage filler
√
15
Drive cage cover
√
16
Tower-to-rack conversion kit
√
17
2.5-inch drive cage
√
18
2.5-inch drive filler
√
19
2.5-inch drive
√
20
2.5-inch hot-swap drive backplane
√
21
Front bezel
√
22
Front door
√
23
2.5-inch to 3.5-inch drive adapter
√
24
3.5-inch drive filler
√
25
3.5-inch drive carrier
√
26
3.5-inch drive
√
27
3.5-inch drive cage
√
28
3.5-inch hot-swap drive backplane
√
60 ThinkSystem ST250 V2 Maintenance Manual