Attaching a Kensington-style cable lock
You can use a Kensington-style cable lock to secure your computer to a desk, table, or other non-permanent
fixture. The cable lock attaches to the security-lock slot at the rear of your computer. Depending on the type
selected, the cable lock can be operated with a key or combination. You can order such a cable lock directly
from Lenovo by searching for Kensington at:
https://support.lenovo.com
Figure 11. Kensington-style cable lock
Attaching a cable lock
A cable lock can be used to secure devices, such as the keyboard and the mouse, by locking the device
cables to your computer. The cable lock attaches to the cable-lock slots on the rear of your computer.
To attach a cable lock, do the following:
1. Insert the clip
1 into the cable-lock slot 3 .
2. Pull the cables you want to lock through the dents in the cable lock.
3. Press the clip
2 into the cable-lock slot 4 until it snaps into position.
Chapter 5. Security 61
To Next Page
Loading...
