Contents
i1
Contents i1
Comments i4
1 Brief description 1
1.1 General 1
1.2 Basic operation 2
1.3 Main features 3
2 Technical Data 5
2.1 Key to types, rating plate 5
2.2 Series of types 6
2.2.1 Technical data at rated current 7
2.2.2 Technical data at basic load current 8
2.2.3 Power loss and cooling air volume 9
2.3 System data 10
2.3.1 Standards, operating conditions and certificates 15
2.3.1.1 Standards applicable 15
2.3.1.2 Certificate 16
2.3.1.3 CE Certificate 16
2.3.2 CE mark 17
2.4 Supply components 19
2.4.1 Components for 3AC supply 19
2.4.1.1 Fuses for 3AC mains connection 19
2.4.1.2 Mains chokes (3-phase chokes) 21
2.4.1.3 Line fuses for operation class gL and cable cross-sections 23
2.4.1.4 Fuse circuit breakers 23
2.4.1.5 Mains contactor 23
2.5 Options 24
2.5.1 Control unit (BDE) 24
2.5.2 Brake chopper and braking resistors 26
2.5.2.1 Brake chopper 27
2.5.2.2 Braking resistors 28
2.5.3 RFI filters 30
2.5.4 Motor filters and output chokes 31
2.5.4.1 Motor filters 31
2.5.4.2 Motor choke 34
2.5.6 Option boards for Alspa MD2000 36
2.5.6.1 Encoder interface 37
2.5.6.2 Operation on a mains supply with no earth 43
2.6 Summary circuit diagrams 44
2.6.1 Summary circuit diagram, 8230 frequency inverter 44
2.7 Connection, terminal wiring 45
2.7.1 Power stack 45
2.7.1.1 3AC supply 45
2.7.2 Electronics section, A10 control board 48
2.7.2.1 Terminal strip wiring :X15 and signal functions 49
2.7.2.2 Description of terminal strip inputs / outputs 54
To Next Page
Loading...
Need help?
General
