Lenze 8230 Series - Commissioning Report

5.5 Commissioning Report
BA8230 141
Drive:
Drive designation: ..........................................................................................................
Type of drive: ........................................ Single motor drive Multiple motor drive
Speed adjustment range ........................................ Reversing Field weakening
from ............. Hz
from ............. min
-1
Torque charakteristic: M = const. M ~ n M ~ n²
M = f(n) as per enclosed charakteristic M and J based on motor shaft
M = f(t) as per load cycle diagram
Inertia moment: J = .......... kgm² Gear / ratio i = ...........................
Special operating
conditions: ......................................................................................
Mains supply: TN ........................... Protection measures: .......................................................
TT ............................ .......................................................
IT ............................. .......................................................
................................. .......................................................
RFI filter ...............
Motor choke ...............
Motor filter ...............
Mains choke ...............
Mains supply: Direct, short circuit rating........ MVA Transformator, rating ....... kVA
for mains voltage matching
Rated voltage: 3AC ........ V Short circuit voltage. .......... %
50 Hz 60 Hz
Motor connection:Cable length approx. ......... m, Cabel type: .............................
Code:

Date
Comm. No. Contac.
FB No.:
Commissioning report
8230 frequency inverter
Drive data
Check.
Serial.No.: Sheet 1





Show/Hide Bookmarks