Technical Data
BA8230 37
2.5.6.1 Encoder interface The encoder interface is an assembly for detecting the speed when using an
incremental encoder. It is required for 8230 frequency inverter drive controls with a
speed actual value encoder to achieve higher control quality and an extension of the
speed adjustment range to values above 1:1000.
The assembly consists of:
• Encoder interface
• Bus adapter cable 40 mm
• Supply adapter cable 40 mm
• Mechanical fixings
• Bus terminator
Fig. 14 shows the basic configuration of the encoder interface assembly.
Fig. 14:
Structure diagram of encoder interface
To Next Page
Loading...
