Lenze 8230 Series - Standards, Operating Conditions and Certificates; Standards Applicable

Technical Data
BA8230 15
2.3.1 Standards, operating conditions and certificates
2.3.1.1 Standards applicable As per 06.1996
VDE 0100-540 Installation of heavy current systems with rated voltages up to 1000 V; selection and
installation in electrical equipment, earthing, protective conductor, potential
compensation conductor
VDE 0106-100 Protection against electric shock; configuration of actuator components close to parts
which are dangerous to touch
VDE 0110 Insulation coordination for electrical equipment in low voltage systems.
Rating of air gaps and creepage distances
VDE 0160/pr EN50178 Installing electronic equipment on heavy current systems
DIN EN 60146-1-1 (IEC 146-1-1) Semiconductor converters; general requirements and mains-fed converters;
basic requirements (DIN VDE 0558 Part 11: 1994-03)
DIN EN 60146-1-3 (IEC 146-1-3) General requirements and mains-fed converters,
transformers and choke coils (DIN VDE 0558 Part 8: 1994-03)
IEC 1000-4-2 Resistance to electrostatic discharge,
requirements and test methods (conversion IEC 801-2)
IEC 1000-4-3 Resistance to electromagnetic HF fields,
requirements and test methods
IEC 1000-4-4 Resistance to fast electrical transients and bursts (conversion IEC 801-4)
IEC 801-5 Resistance to surge voltages on mains supply cables (surge pulses)
IEC 1000-4-5 Resistance to voltage peaks
DIN EN 55011 Radio interference suppression of electrical plant and equipment;
(VDE 0875 Part 11), limits and test methods for radio interference suppression of
industrial, scientific and medical high frequency equipment
DIN EN 55022 Electromagnetic compatibility of equipment in information processing and
telecommunications technology (VDE 0878 Part 3), limits and test methods for radio
interference suppression on technical information equipment
IEC1800-3/prEN61800-3:1995 EMC product standard for variable speed drives
(IEC22G/21/CDV) EMC interference resistance and radiated interference Anforderungen und
Meßverfahren
DIN EN 50081-1 Electromagnetic compatibility (EMC); specialist basic standard for radiated
interference;
Part 1: Residential, business and light industry
DIN EN 50081-2 Electromagnetic compatibility (EMC); specialist basic standard, radiated interference;
Part 2: Industrial
DIN EN 50082-1 Electromagnetic compatibility (EMC); specialist basic standard, interference
resistance;
Part 1: Residential, business and light industry
DIN EN 50082-2 Electromagnetic compatibility (EMC); specialist basic standard, interference
resistance,
Part 2: Industrial (VDE 0839 Part 82-2)
Show/Hide Bookmarks