Lenze 8400 - Homing

Lenze · 8400 "Position Sequencer" technology application · Software manual · DMS 1.0 EN · 07/2014 · TD05 43
5 Appendix: Action types for the positioning sequence control
5.1 Homing
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.1 Homing
For starting a homing process, the "Homing" action type is provided. When homing has been
completed (bHomingDone = TRUE), the program flow is continued with the next step.
 Note!
The "Homing" action has no individual parameters. The settings for homing (e.g. homing
mode) are carried out via the parameters of the basic function "Homing". Click the
Homing button to navigate to the corresponding parameterisation dialog.