6 Commissioning
6.3 Settings in »Engineer«
34
Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 10.2 EN · 11/2018 · TD06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3 Settings in »Engineer«
Settings / display Code
Selection of the sync source for DC synchronisation
See also DC configuration in the Servo Drive 9400 (slave)
( 38).
C01120
Display of the status of synchronism of the Servo Drive 9400
Only if Synchronisation with "Distributed clocks" (DC)
( 36) is used.
C13884
/ C14884
Display of the active station address
See also Address allocation
( 35).
C13864
/ C14864
Entry of the station alias address
See also Address allocation
( 35).
C13899
/ C14899
To Next Page
Loading...
