Lenze 9400 Series

Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 10.2 EN · 11/2018 · TD06 85
12 Diagnostics
12.1 LED status displays
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Diagnostics
For purposes of fault diagnostics, the communication module is provided with the LEDs on the front.
Furthermore, you can carry out the Diagnostics with the »Engineer«
( 90).
12.1 LED status displays
The following status displays can be differentiated:
Module status displays
( 86)
EtherCAT status displays
( 87)
Status display at the RJ45 sockets (X246 / X247)
( 89)
 Note!
During normal operation ...
• only the LEDs MS
( 86) and BS ( 87) should be lit constantly.
• the green LED on the RJ45 sockets X246 /X247 must be lit or blinking
( 89).