Lenze 9400 Series - Page 51

Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 10.2 EN · 11/2018 · TD06 51
6 Commissioning
6.7 EtherCAT ADS communication parameters in »TwinCAT« and »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Display of the communication parameters in »TwinCAT«
The communication parameters IP address (here ’172.31.200.10’) and EtherCAT Master
Net ID (here ’5.3.66.236.4.1’) can be found under the target system selection:
The EtherCAT Master Net ID (here ’5.3.66.236.4.1’) can also be found under the EtherCAT tab of
the EtherCAT master: