Installation
L
68 EDBEPM-H520 DE/EN/FR 4.0
Take off the housing cover
0
1
2
3
4
5
+24 VDC
N.C.
0 VDC
CAN+
N.C.
Shield
CAN-
V-
1
2
3
4
INPUT VOLTAGE:
18 - 32 VDC 15 W
fuse 1.25 A
MSP
LPT
back-up expansion
h520_009
Fig. 3-3 Take off the housing cover
1. Loosen bolts
&
and remove housing cover
Flash module 8 MB (back-up) mounting
LPT
A
C
B
h520_012
Fig. 3-4 Flash module 8 MB (back-up) mounting
1. Insert the distance pins
'
into the bores of the main board and press until they click into place
2. Carefully insert the flash module
&
into the female plug strip
)
and slightly press to fix them
3. Align the bores of the flash module
&
and the distance pins
'
4. Press the flash module
&
onto the distance pins
'
until they click into place
To Next Page
Loading...
