Lenze EPM-H520 - Saving Data on a 8 MB Flash Module

1
4
7
2
5
8
0
3
6
9
Operation
L
90 EDBEPM-H520 DE/EN/FR 4.0
5.6 Saving data on a 8 MB flash module
! Use this card to store and archive your application-specific configuration for a project.
! The card can be fitted in any keypad of the same type to transfer the project data to this
keypad.
! The following functions will be available if the flash module is mounted into a keypad. (% 67)
You want to ... Press keys ... Example
A) access the flash module.
1. Select system page. For this, touch the
display in the
– top right
& and bottom left ) or
–topleft
' and bottom right (
corners.
The corner to be touched first must not
contain a field for a selectable object.
0
1
2
3
2. Select transfer page.
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
3. Select menu “FlashCARD”.
FlashCARD
H520 TRANSFER PAGE
Touch screen BOOT check: OK
Graphic controller BOOT check: OK
Graphic controller RAM check: OK
Main BOOT and RAM check: OK
SELECT: MSP FlashCARD EXIT
B) select the function.
Flash CARD MENU
BACKUP
ERASE CARD
RESTORE
EXIT
• BACKUP
– Saves project to the memory card.
BACKUP
Flash CARD MENU
BACKUP
ERASE CARD
RESTORE
EXIT
• ERASE CARD
– Deletes contents of the memory card.
ERASE CARD
Flash CARD MENU
BACKUP
ERASE CARD
RESTORE
EXIT
• RESTORE
– Transfer of memory card contents to
the keypad.
RESTORE
Flash CARD MENU
BACKUP
ERASE CARD
RESTORE
EXIT
• EXIT
– “Quit the flash CARD MENU“.
EXIT
Flash CARD MENU
BACKUP
ERASE CARD
RESTORE
EXIT
C) quit the transfer page.
EXIT
Show/Hide Bookmarks