Lenze EPM-H520 - Status Messages for the Keypad

Commissioning
L
77
EDBEPM-H520 DE/EN/FR 4.0
4.3 Status messages for the keypad
The keypad status can be queried any time. Information can be obtained about
! the interface (port)
! the name of the loaded driver
! the version of the loaded driver (Ver)
! mains address of the keypad (Addr VT)
! the last error
You want to ... Press keys ... Example
A) quer y status messages. To do this, touch
the display in the
• top right & and bottom left ) or
• top left ' and bottom right ( corners.
The corner to be touched first must not
contain a field for a selectable object.
0
1
2
3
B)
select more status pages
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Every port has its own status page.
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
C) close the status message
ESC
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
Show/Hide Bookmarks