1
4
7
2
5
8
0
3
6
9
Operation
L
86
EDBEPM-H520 DE/EN/FR 4.0
5.3 Calling up information messages
!
Information messages
– are texts which appear after a certain event (e. g. an actual value exceeds a limit).
– can only be called up as long as the triggering event is active.
– must have been programmed in the planning tool “HMI Designer”.
– can be 4 lines long with a max. of 70 characters (normal character size).
!
The last but one line contains a programmable message field. This field shows the numerical
value of the variable that triggered the message.
!
The last line shows the date and time of the message.
!
indicates an information message.
Symbols and characters used in information messages
Symbols/characters used in the line for
date/time
Meaning
"
The informa tion message has been called up for the first
time.
HELP The information message is assigned to a help function.
( * 89 )
You want to ... Press keys ... Example
A) call up an information message.
•
Max. 4 information messages can be
indicated per page.
ESC
Pressure exceeds
safety limit
125.5
13-09-2000 10:45a
Temperature exceeds
safety limit
1700
13-09-2000 10:55a HELP
Water level below
working threshold
-10
13-09-2000 11:00a HELP
Gas saturation in the stokehole has
reached limit value
345
13-09-2000 09:00a
B) select the next information.
or
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
ESC
Water pump stopped
13-09-2000 10:45a
C) close an information message.
ESC
To Next Page
Loading...
