Lenze EPM-H520 - Date;Time and Contrast Setting

Commissioning
L
78
EDBEPM-H520 DE/EN/FR 4.0
4.4 Date/Time and contrast setting
You want to ... Press keys ... Example
A) Set date/time and contrast
1. Call up status messages. For this, touch
the display in the
– top right
& and bottom left ) or
–topleft
' and bottom right (
corners.
The corner to be touched first must not
contain a field for a selectable object.
0
1
2
3
2. Select menu for date/time and contrast
PROG
Port : NET
Driver : CAN Lenze S
Ver : 1.06
Addr VT: NO ADDRESS
Error : NO ERROR
PROG
ESC
TRAN
B) Set date/time
1. Touch the field “SET CLOCK” to select
the menu.
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
2. Select the required field.
or
12:50:10 13/09/00
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
3. Change the value.
or
12:50:10 13/09/00
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
4. If necessary for changing further values,
repeat step 2. and 3..
12:50:10 13/09/00
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
5. Confirm the input.
– The menu for time/date and contrast
will be displayed.
12:50:10 13/09/00
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
Show/Hide Bookmarks