Lenze EtherNet/IP 8400 - Page 121

Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17 121
13 Parameter reference
13.1 Parameters of the communication module
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13902
C13920
Parameter | Name:
C13902 | Firmware Version
Data type: VISIBLE_STRING
Index: 10673 = 0x29B1
The code contains a string with a length of 11 bytes. The firmware version is displayed (e.g. "01.00.01.00").
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13920 | Rotary coding switches: xxx.yyy.zzz.DDD
Data type: UNSIGNED_8
Index: 10655 = 0x299F
Indication of the current value set by means of the rotary coding switches.
Setting node addresses by means of rotary coding switches
( 40)
Display range (min. value | unit | max. value)
0 255
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT