Lenze EtherNet/IP 8400 - Page 63

Lenze · E84AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 10/2013 · TD17 63
8 I/O data transfer (implicit messages)
8.4 I/O configuration in the »Engineer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. On the Ports tab, the port blocks
MCI_IN and MCI_OUT for the I/O data objects are
shown.
• By clicking the required port, the preconfigured signal combination can be obtained
from the
application variables.
• If you want to complement or change the signal combination, click the
Change
Variable … button.