Lenze EZAEDE1001 - Safety Precautions

Lenze EDBZAEDE1001 DE/EN/FR/ES/IT 1.0 5
EN
Introduction 1
1 Introduction
The Memory Module Copier, P/N EZAEDE1001, is designed to duplicate the memory contents
from a master memory module to a slave memory module. It is compatible with the memory
modules of the Lenze and Lenze-AC Tech products listed herein.
Lenze Lenze-AC Tech
8400 Base/State/High/Topline PositionServo (940/941)
8400 motec, protec SMVector
smd, Tmd, Tml SCF, TCF, SCD
SCM, SCL
1.1 Document History
Material Number Version Description
13438043 1.0 06/2013 First edition
1.2 Identification
Figure 2 illustrates the dataplate label on the Memory Module Copier.
Made in USA
Memory
Module Copier
TYPE: EZAEDE1001
HW: 1A SW: 10
USB Power Supply: 5VDC
500mA min
Connector Type: Mini-B USB
Battery: Li-ion, 3.7VDC
2400mAh, Rechargeable
For detailed information
refer to instruction
manual EDBZAEDE1001
13xxxxxx 012345678
EZAEDE1001XX1A10
ID-NO: 13xxxxxx
Figure 2: Data Label
1.3 Scope of Delivery
Scope of delivery Important
• 1 Memory Module Copier (Type:
EZAEDE1001)
• 1 Lithium Ion 3.7VDC
Rechargeable Battery (Type:
13367797)
• 1 Mini-B USB Power Supply
(Type: 13367779)
• 1 Operating Instructions
After receipt of the delivery, check immediately whether the items
delivered match the accompanying papers. Lenze does not accept
any liability for deficiencies claimed subsequently.
Claim
• visible transport damage immediately to the forwarder.
• visible deficiencies / incompleteness immediately to your Lenze
representative.