Leuze electronic Device parameters and interfaces
Leuze electronic BPS 8 45
TNT 35/7-24V
Copying and pasting devices
It is possible to copy and paste individual devices. To do this, the device to be copied must
be selected. By clicking on the right mouse button, the Copy and Paste functions become
available. Only the device settings are copied, not the deposited interface data of the PC.
Renaming devices
It is possible to rename devices. This requires the respective device to be selected. Right
click on the mouse button, select Device properties… and enter the desired description
under Name.
Graphical configuration
If a device is selected via the left mouse button, the window of the graphical configuration
opens automatically. The graphical interface visualises the device settings and these can be
loaded or transferred using the symbols and .
For further help on device-specific parameters, the technical description for the selected
device may be opened. To view the technical description for the device, click on the
symbol.
All parameters that were changed, i.e. that deviate from the Leuze factory settings, have a
yellow background or frame colour or are marked with the
symbol for better orientation.
To reset all parameters of the selected device back to the Leuze factory settings, click on
the symbol. This only resets the values in the PC and not the settings in the BPS.
Tree structure configuration
The second option for working off-line is the tree structure. The tree structure contains all
settings of the graphical structure plus additional parameters.
Display erroneous parameters
Display changed parameters
Display all parameters
Close all parameters
To Next Page
