Firmware Version - Current version of the firmware in the NAS.
Hardware Address - Hardware Address of the NAS.
IP Address - IP Address currently used by the NAS.
Date - Current date of the NAS.
Time - Current time of the NAS.
Current Status - Indicates the current status of the NAS. This will
usually state "Ready".
If the NAS is not ready, the message will say why the NAS is not
ready.
The NAS supports USB printer, and it can share the printer after you connect
one printer into one USB port.
Current Status - Possible states are On Line, Off Line, and Out of
Paper or No Printer.
No. of Print Jobs - The total number of print jobs in the Print Queue,
waiting to be printed.
Display the status of Internal Disks.
Disk Mode - The current mode of the disk.
Disk Status – Displays the current status of the internal disks.
Free Space - Amount of the disk space still available to users.
Total Space - Total amount of the disk space.
Disk - Number of USB disk.
Model - Model name of the disk, it's provided by the manufacturer.
Capacity - Total space of the disk which can be used.
Status - The current status of the disk.
Display the status of USB Disks.
Model - Model name of the disk, it's provided by the manufacturer.
Partition - Partition number of USB disk.
File System – File system used in the partition.
Share - Corresponding share of the partition.
Total Size - Total size of the partition.
Free Size - Free size of the partition.
To Next Page
Loading...
