LevelOne GNS-2000 - Getting Familiar with Your NAS; Leds

5
Getting Familiar with your GNS-2000
LEDs
LED
Function
Ready/Status
Ready (Green)
 ON – Normal operation.
 OFF – No power.
 Blinking – This LED blinking during startup and shutdown.
Status (Amber)
 ON – This LED will be On during the Startup self-test; it will turn
Off once the self-test is completed. If it stays ON, there is a hard-
ware error.
 OFF – Normal operation.
 Blinking – During a software upgrade, both the Status and Ready
LEDs will blink.
LAN
 ON – LAN connection established.
 OFF – No LAN connection.
 Blinking – Data is transmitted or received via the LAN.
Disk Active
 OFF – Idle.
 Blinking – Hard disk is being accessed.
Disk Full
 ON - Disk is completely full. No more data can be stored on this
disk.
 OFF -Normal operation, disk is not full.
 Blinking - Disk is 98% full (The Buzzer will also beep 3 times.)